| 1. |
PMR/Solar hot air engines, alcohol fired,
ready to run, they don't make much torque, but the will turn 1000+ rpm,
Made in USA. |
|
|
PMR Original Stirling Cycle hot air engine - 7"
long, with 128 pg.Stirling Engine book by A. Ross Great for science
projects! |
$125.00 |
|
|
|
|
|
|
PMR The Flame
Eater-Fantastic Vacuum Engine large, heavy, and impressive, this
engine runs at speeds up to 1000RPM! Shipped ready-to-run, this engine
is 8-1/2"long and includes alcohol burner. Great for display,
hobbyists, or science projects |
$355.00 |
|
|
|
|
|
|
PMR Stirling Cycle driven fan - 14" tall, coaxial
Stirling engine w/ a 6-1/2" dia. fan, like great-grandma had! |
$290.00 |
|
|
|
|
|
|
PMR Peanut Rider Hot Air Engine
inspired by the 1880's DeLameter Iron Works Rider Engines. This 9" tall
black and red model is mounted on a handome hardwood base. Complete and
ready-to-run engine comes with alcohol fuel cell, extra wick, hex key,
and owner's manual. OUR BEST SELLING HOT AIR ENGINE! |
$150.00 |
|
|
|
|
|
|
PMR 1895 Rider Ericsson Hot Air Pumping
Engine The Rider-Ericsson was the only hot air engine ever
manufactured in production quantities for domestic use. It is a
fascinating engine to watch run. Complete and ready-to-run engine comes
with alcohol burner, extra wick, owners manual and leaflet on the
original engine. 6" tall, water
cooled w/ pump |
$325.00 |
 |
|
|
|
|
| 2. |
PMR/Solar 'Thinking man's engine' kit-a
fully machined,
ready to assemble Stirling Cycle engine, dry fuel fired
for extra safety - 7-1/2" long,
A great first construction or science project, |
$93.00 |
|
| 3. |
Hot Air Engine casting Kits |
|
|
|
PMR 'Glassworks' engine kit - this stirling cycle
engine has pyrex cylinders so you can see it work . Kit includes:
finished cylinder, rough castings, drawings, materials and fasteners |
$144.00
|
|
| 4. |
Imported hot air engines
stainless and brass ready-to-run , alcohol fired hot air engines with
speeds to 2000rpm, interesting configurations and plenty of motion |
|
|
|
YT95 Deluxe Swing Arm - 6-3/16"l x 5-3/16"t |
$275.00 |
 |
|
YT105 Deluxe Flyer - 6-3/16"l x 5-3/16"t
|
$275.00
|
|
|
YT135 Little Bonsai - 6-3/16"l x 5-7/8"t |
$275.00 |
 |
|
YT115 Little Pump - 6-3/16"l x 5-3/16"t |
$265.00 |
 |
|
YT155 High Tree 5"l x 6-5/8"t |
$275.00 |
 |
|
YT125 Big Power Station Twin cylinder version of the YT115 |
$375.00 |
|
|
YT145 Big Bonsai Twin cylinder version of the YT135 |
$375.00 |
|
|
YT165 Big Tree twin cylinder version of the YT155 |
$375.00 |
|
|
|
|
|
| 5.* |
"Hit 'n Miss" Engine kits from
various manufacturers, subject to availability. |
|
|
De Bolt Olds Vertical Gearless Engine -
4/10 scale model of an 1890s 2-1/2HP. It incorporates a pendulum
governor, igniter, and fuel
pump, all without the use of gears. Instead it
utilizes a notched cam and
ratchet. The specifications are as follows: 1-3/4"
bore ax 2-1/4" stroke,
12" flywheels, height 22-1/2", weight
approximately 80 pounds. Casting Kit includes: 10 iron
castings, 11 brass castings, 6 pieces of bar
material, 11 springs, nameplate, plans and assembly video
|
$720.00,
requires a $200.00 deposit
|
Unpainted Pilot Model - Feb 2003
These engine kits will be produced ONLY as ordered.
Purchase of this model requires a non-refundable
deposit, and waiting period. You will receive periodic
updates on the progress of
your engine, and be billed for the
balance plus delivery costs shortly
before item is shipped.
|
|
Olds Gearless Mechanic's Kit (Machined
ready-to-assemble) includes: Complete set of
machined parts, al nuts bolts, lubricating cups, piping and sundries,
complete fuel system, igniter, low tension coil, nameplate, assembly
drawings and video
|
$4,750.00, requires a $1,250.00 deposit
|
|
|
Ready to Run Engine includes: Completely
assembled model plus paint, polish,
and woodwork
|
$5,850.00, requires a $1,600.00 deposit.
|
|
|
|
|
|
*
|
Touchtrop 'American Beauty'
gasoline engine kit - This engine is based on the Sears "ECONOMY"
hit & miss engine. 1-1/8" bore x 1-3/4" stroke, kit includes,
drawings,
aluminum & iron castings, kit requires machining.
|
|
|
|
Touchtrop American Beauty kit with Iron
flywheels
|
$245.00
|
|
|
gears for 'American Beauty', set of 3
|
$60.00
|
|
|
rings, springs, lubricators, spark plug, crank
bearings, flange bearings, stock for sleeve & crank
|
$75.00
|
|
|
Sight lubricator #10-32thd |
$20.00 |
|
|
Spark plug 1/4-28thd, marked "champion" |
$19.00 |
|
*
|
finished valves w/seats, |
$24.50
|
|
| * |
Finished mixer |
$30.00
|
|
*
|
American Beauty package w/iron flywheels:
includes all listed above plus asst. sundries not listed. |
$375.00
|
|
|
|
|
|
|
Tochtrop Atkinson A remarkable feature
of this engine is that the piston is so coupled to the crankshaft that
the 4 strokes are completed in one revolution, moreover these strokes
are all of different lengths. 1-1/8” bore, 7” flywheels, Kit includes;
17 castings (iron, bronze & aluminum) drawings, and some
sundries (rings,
gov belt, plug, points, etc)
|
$335.00
|
|
|
Tochtrop Twin Cylinder Engine - 1-1/8" bore x 1" stroke, overhead cam, 28 castings and drawings - Limited availability
|
$420.00
|
|
|
Burnett "Billy Boy II" aluminum barstock
headless engine with finned cylinder reminiscent of old air cooled farm
engines. A
good runner, this affordable almost ready to run engine is sold ready
to
paint, less electrics, 6v car type coil required. (subject to
availability) |
$420.00
|
|
|
Burnett Vertical headless, latest
incarnation of the "Billy Boy" series. A freelance barstock model.
A
good runner, this affordable almost ready to run engine is sold ready
to
paint, less electrics, 6v car type coil required. (subject to
availability) |
$420.00
|
|
|
|
|
|
