Scale Model Traction Engines
Prices as of 5-05
Scale Model Traction Engines
Prices as of 5-05
| Maxitrak
Ltd:
Reasonably priced high quality scale models, made in England 3" scale (1/4 size) models |
||
| Aveling and Porter Traction Engine - model is one quarter full size, as such it is a large and powerfull engine capable of holding its own on the rally field with its full sized brothers. It stands 3ft 6" long, 2ft 6" tall | Machined Kit $13,950.00 Painted kit $16,150.00 RTR $18,250.00 |
 |
| Aveling and Porter Steam Wagon - The over type steam lorry was built by most British traction engine manufacturers. Aveling and Porter where no exception building about two hundred lorrys in the early part of the 20th century. This model is based on the 1920's version, making a self contained ride on engine of conciderable power and presence | Machined Kit $18,100.00 Painted kit $19,575.00 RTR $21,500.00 |
 |
| Aveling and Porter Showman's Engine - Bright brasswork and a working dynamo make this a fantastic model for the collector or hobbyist. | Machined Kit $16,900.00 Painted kit $19,000.00 RTR $20,600.00 |
|
| 1" Scale (1/12 size) Models | ||
| Burrell Traction Engine - This version shows to good effect the style of the typical British agricultural traction engine with spoked flywheel, brass topped chimney, open crank, and strake shod wheels. These engines where used for threshing, sawing and general farm work. | Machined Kit $4,440.00 Painted kit $5,450.00 RTR $6,950.00 |
 |
| Burrell Road Locomotive - These engines where built for heavy road haulage, they have rubber tires for road use, motion covers and disc flywheel (so as not to frighten horses!). They are equiped with belly tank and extended bunker for longer running between fill ups. | Machined Kit $5,100.00 Painted kit $6,250.00 RTR $7,850.00 |
 |
| Burrell Showman's Engine - The showmans road locomotive is for many the ultimate traction engine, with it's belt driven dynamo, full length canopy and many decorative brass details. This fully detailed model captures the splendour of these impressive engines. | Machined Kit $5,375.00 Painted kit $6,650.00 RTR $8,595.00 |
 |
| Atkinson Steam Wagon - produced from 1916 to the
mid-1920`s
and was one of the most popular and successful “undertype” steam lorry
designs. This model of the Atkinson faithfully reproduces the vertical boiler and twin cylinders under the chassis, with chain drive to the rear axles via the differential. The Maxitrak Atkinson comes complete with two channel radio control, one for steering and the other for regulator and reverse. |
Machined Kit $2,525.00 Painted kit $3,225.00 RTR $3,750.00 |
 |
| Super Sentinal Steam Wagon - Mechanically similar to the Atkinson the Sentinal steam lorry has the full cab and windscreen typical of the "Super Sentinal" built from the mid into the early 30's. | Machined Kit $2,695.00 Painted kit $3,395.00 RTR $3,895.00 |
 |
| Low Loader - designed to take the weight of an adult,
it
comprises a timber box on a steel body with 16 indivdual wheels,
running on needle roller bearings. As well as looking the part it also gives the Burrell road loco owner an authentic trailer to ride apon. |
Machined Kit $ Painted kit $ RTR $ |
 |
| Living Van - 1" scale living van is a scale replica of
the vans
used by traction engine crews for accomodation. They where a
common
site on farms during the threshing season as the crews worked long
hours
bringing in the harvest. The model is of wood construction with cast bronze wheels. |
Machined Kit $ Painted kit $ RTR $ |
 |
Note: For Mamod and Wilesco
traction engines see
Live Steam Toys
|
|
|
|
|
How to Order |
steamnut@verizon.net
724-357-9752